Your cart

Your Cart is Lonely

 

Your battery should be completely charged when the charger light turns a solid Green after a full 12 hours of charging. If your charger shows a solid Green light after charging for a shorter period of time, your battery may not be fully charged. Continue charging for the full 8 hours. It is ok to charge the battery after each use even if the battery power is not completely drained.

Check to see that your charger is working properly by following these steps:

STEP 1 – First, check to make sure you have the correct charger. Make sure the voltage is accurate for your scooter. Razor electric products require either a 24 or 36-voltage charger depending on the model.

STEP 2 – Plug charger into your electrical power outlet. The light should be solid Green.

STEP 3 – Next, plug the charger into the charging port in your Razor scooter. Make sure that it is plugged correctly to the charger port. The light should now be solid Red.

STEP 4 – When charging is complete and the charger is Green again , unplug the charger from the wall and then the charger port. You should now be ready to go.

By using our site, you acknowledge that you have read and understand our Privacy Policy, and our Terms of Service.

close